Target Mould
  İ Russia   

Services

Zhejiang Huangyan Target Mould Co.,Ltd.

Technical Reference->Product Design->Product Design C Radii
Product Design C Radii

It is best not to design parts with sharp corners. Sharp corners act as notches, which concentrate stress and reduce the part's impact strength. A corner radius, as shown in the Suggested Design for Corner Radius illustration, will increase the strength of the corner and improve mold filling. The radius should be in the range of 25% to 75% of wall thickness; 50% is suggested. The Stress Concentration as a Function of Wall Thickness and Corner Radius illustration shows stress concentration as a function of the ratio of corner radius to wall thickness, R/T.




Zhejiang Huangyan Target Mould Co.,Ltd.
Add: North Industry Development Zone,Huangyan,Taizhou,Zhejiang,China
Tel: (86)-576-84606822
Fax:(86)-576-84606811
Website:http://www.zhejiang-mould.com/
                http://www.mould-china.net/
E-mail:moulds@china.com
Home About us News Technical Reference F.A.Q Contact Product Design Mold Design
Reverse Engineering Design Flow Precise Mold
Large Mold Hot Runner Mold Gas-assisted Mold
Double-colored Mold Moldflow Analysis
Manufacturing Flow Injection Molding Rapid Prototyping Assembly Quality Assurance