Target Mould
  İ Russia   

Services

Zhejiang Huangyan Target Mould Co.,Ltd.

Technical Reference->Product Design->Product Design-Draft Angle

Product Design -> Product Design-Draft Angle

Product Design-Draft Angle

So that parts can be easily ejected from the mold, walls should be designed with a slight draft angle, as shown in the Exaggerated Draft Angle illustration. A draft angle of 1/2 draft per side is the extreme minimum to provide satisfactory results.

1 draft per side is considered standard practice. The smaller draft angles cause problems in removing completed parts from the mold. However, any draft is better than no draft at all.

Parts with a molded-in deep texture, such as leather-graining, as part of their design require additional draft. Generally, an additional 1 of draft should be provided for every 0.025 mm depth of texture.


 


Zhejiang Huangyan Target Mould Co.,Ltd.
Add: North Industry Development Zone,Huangyan,Taizhou,Zhejiang,China
Tel: (86)-576-84606822
Fax:(86)-576-84606811
Website:http://www.zhejiang-mould.com/
                http://www.mould-china.net/
E-mail:moulds@china.com
Home About us News Technical Reference F.A.Q Contact Product Design Mold Design
Reverse Engineering Design Flow Precise Mold
Large Mold Hot Runner Mold Gas-assisted Mold
Double-colored Mold Moldflow Analysis
Manufacturing Flow Injection Molding Rapid Prototyping Assembly Quality Assurance