Target Mould
  İ Russia   

Services

Zhejiang Huangyan Target Mould Co.,Ltd.

Technical Reference->Mold Design->Mold Design-Sprue Bushings
Mold Design-Sprue Bushings

Sprue bushings connect the nozzle of the injection molding machine to the runner system of the mold. Ideally, the sprue should be as short as possible to minimize material usage and cycle time. To ensure clean separation of the sprue and the bushing, the bushing should have a smooth, tapered internal finish that has been polished in the direction of draw (draw polished.) Also, the use of a positive sprue puller is recommended. The Three Common Sprue Pullers illustration shows three common sprue puller designs.

Mold Design Sprue Bushings
Three Common Sprue Pullers

 

 


Zhejiang Huangyan Target Mould Co.,Ltd.
Add: North Industry Development Zone,Huangyan,Taizhou,Zhejiang,China
Tel: (86)-576-84606822
Fax:(86)-576-84606811
Website:http://www.zhejiang-mould.com/
                http://www.mould-china.net/
E-mail:moulds@china.com
Home About us News Technical Reference F.A.Q Contact Product Design Mold Design
Reverse Engineering Design Flow Precise Mold
Large Mold Hot Runner Mold Gas-assisted Mold
Double-colored Mold Moldflow Analysis
Manufacturing Flow Injection Molding Rapid Prototyping Assembly Quality Assurance